1. Core technical points 1: 200KG load adaptation technology (avoiding overload/unbalanced load, foundation for stable operation)

Technical principles

Through the body pressure sensor + intelligent counterweight algorithm, it automatically matches the power output and braking intensity of the 200KG load. No manual adjustment of parameters is required, and novices can accurately adapt to the load.

Operation steps

1. Load preprocessing : Place the 200KG cargo according to the "center of gravity" principle (left and right eccentric load ≤ 3cm, front and rear eccentric load ≤ 5cm), and fix it with binding straps (refer to GB/T 20014.3 Safety Standard for Hoisting Machinery) to avoid shifting during transportation；

2. Automatic adaptation starts : After starting the transporter, switch to the "200KG special mode" (one-click selection on the central control screen). The system detects the actual load through the pressure sensor and automatically adjusts the driving torque and suspension hardness within 3 seconds.；

3. Adaptation status confirmation : The central control screen displays "Load adaptation completed" (green mark) and there is no "eccentric load warning" prompt, then transportation can be started.； If a yellow warning appears, readjust the placement of the goods and adapt again.

Key Tips

• If the goods are in pieces (total weight 200KG), use pallets to consolidate them first to avoid misjudgment by the sensor due to single-point force.；

• Before operating in a low-temperature environment (≤0℃), run the system without load for 1 minute to warm up the system, and then perform load adaptation.

2. Core technical points 2: Precision control technology (stable movement at low speed + precise alignment, even novices can control it)

Technical principles

Integrating "stepping drive + electronic power steering", it supports low speed and constant speed (0.5-2km/h) under a 200KG load, with a minimum turning radius of ≤1.2 meters, meeting the needs for precise alignment in narrow spaces.

Operation steps

1. Speed ​​selection : Press the "Low Speed ​​Mode" button after startup (optimal speed adapted to 200KG load) to avoid cargo shaking caused by high-speed driving；

2. Directional control : Turn the steering wheel slowly when turning (steering angle ≤30°/second), the system's electronic power assist automatically intervenes to reduce operating effort, and automatically reduces the speed when turning (anti-rollover)；

3. Precise alignment : When approaching the target position, press "fine-tuning mode", the driving speed will be reduced to 0.3km/h, the real-time distance will be displayed on the central control screen (error ≤5cm), the direction will be fine-tuned to complete the landing point alignment, and the steering wheel will be released to automatically park (anti-rolling).

Key Tips

• When transporting over long distances (≥50 meters), you can switch to "medium speed mode" (1.5km/h) to save time；

• When working in narrow passages (width ≤ 3 meters), turn on the "path auxiliary line" (displayed on the central control screen) and drive along the auxiliary line to avoid collisions.

3. Core technical points 3: Security protection technology (double guarantee to eliminate risks)

Technical principles

It has three built-in "mechanical + electronic" safety systems, dual braking, overload protection, and anti-rolling, to avoid all safety hazards in 200KG operating scenarios.

Operation steps

1. Pre-start safety check ：

• Mechanical brake: Pull the handbrake and confirm that the transporter is stationary and does not slip.；

• Electronic braking: Press the "Brake Test" button, the central control screen displays "Braking is normal"”；

• Overload protection: Confirm that the load is ≤200KG (system rated load, 10% overload will trigger protection)；

2. Safe operation during operation ：

• When encountering an obstacle, lightly press the brake pedal (electronic braking takes priority), and the system will automatically distribute the braking force to avoid sudden braking that may cause cargo to fall off.；

• If a red "overload alarm" occurs (load > 220KG), the system will automatically cut off the driving power and park, then restart after reducing the load.；

3. Shutdown ends safely ：

• After reaching the target position, first apply the brake to park, and then apply the handbrake (double braking)；

• After unloading the cargo, switch to "no-load mode" and confirm that there are no fault prompts on the central control screen before turning off the power.

Key taboos

• It is strictly prohibited to load and unload 200KG cargo on a slope (slope > 5°). Operations must be done on level ground.；

• If the brake fails during operation, immediately press the red "emergency brake" button (mechanical brake forced intervention), and troubleshoot before use.